Cutting tools Finishing Blades Thin Kerf

Finishing Blades Thin Kerf

Triple Chip Saw Blades (TCG) for Wood & Laminates Thin Kerf

Thin kerf circular saw blades are specialty blades, created for minimizing material waste in expensive hardwoods and hardwood plywood. They leave very thin width of the cut due to its actual tooth and plate width. While a typical circular saw kerf will be 1/8″ to 3/16″ (0.125″ to 0.187″), thin kerf blades cut a saw kerf of 3/32″ (equaling 0.093″) or less. While that 1/32″ of material may not seem like much, it can add up to be a great difference for materials which cost as much as $60.00 per board-foot. Blade can save at least 30% of the material comparing to the full kerf blades. The common application of thin kerf blades is for dimensional or engineered lumber where precise sizes mean a lot. Some of the advantages are better finish, less energy consumption by a circular saw and less waste. Thin kerf blades are available as rip cutting, crosscutting or combination saw blades, depending upon the need.

Tool No.DiameterTeethKerfBore
8-34 THIN-T8"34.090" (2.3mm)5/8"
8-64 THIN-T8"64.094" (2.4mm)5/8"
10-40 THIN-T10"40.090" (2.3mm)5/8"
10-80 THIN-T10"80.090" (2.3mm)5/8"
12-48 THIN-T12"48.090" (2.3mm)1"
12-96 THIN-T12"96.094" (2.4mm)1"
14-54 THIN-T14"54.090" (2.3mm)1"
14-108 THIN-T14"108.090" (2.3mm)1"

More Product of TCT Saw Blades ... Finishing Blades | Cut Off Blades Thin Saw Blades (ATB)